Restarting Dante Controller - Extron electronics AXI 02 AT User Manual

2. If it is on, turn off the PC wireless adapter. Disable all connections except the LAN
port connected to the Dante network (verify this is the correct port by checking the IP
address shown in step 1).
3. Turn off all anti-virus and firewall software on the computer.
4. Enable DHCP on the remaining network connection. This forces the computer to
acquire an IP address from the Dante network.

Restarting Dante Controller

If subscriptions or normal operation cannot be restored, restart Dante Controller software
(see the Dante Controller Help file for the procedure). To access the Dante Controller Help
file, do any of the following:
• Click the
• Select
• Press the <
Figure 30.
icon in the upper-right corner of the Dante screen (see figure 30,
Help
from the menu (
Contents Help
> keys on the computer keyboard.
Shift+F1
Accessing the Dante Help File
) on the Dante screen.
2
AXI 02 AT • Dante Controller
).
1
26