Disconnecting From A Device - Extron electronics AXI 02 AT User Manual

3. When a connection with the device is established, the
dialog box opens. From the dialog box, one of two options can be selected:
Figure 12.
a. Pull — Pulls DSP configuration and preset name data from the device and displays
it in the DSP Configurator workspace. Pulling a configuration overwrites the current
configuration file open in DSP Configurator.
b. Push — Pushes the DSP configuration and preset data from the current
configuration file to the connected device. Pushing a configuration file overwrites
any configuration and presets currently on the device.
Click the
There are two options to choose from.
1.
2.
4.
Click
OK
DSP Configurator status panel and the device is ready for further configuration.

Disconnecting from a Device

1. Click the
). Alternatively, select
1
keyboard.
Figure 13.
2. Click
OK
Figure 14.
Synchronize with Device Dialog Box
button to open the
Advanced...
Default — Pushes the entire configuration file including preset data.
Custom — Allows the user to push the configuration only, all presets only, or
selected presets only.
NOTE: If only pushing selected presets, the preset selection dialog box
appears after clicking
OK
. When the push or pull is completed,
button in the DSP Configurator Software menu bar (see figure 13,
Emulate
Tools >Disconnect from Device
1
Emulate Button
to confirm (see figure 14,
2
2
Confirm Disconnect Dialog Box
Synchronize with Device
Advanced Push Options
in the
Advanced Push Options
is displayed in the
Current State
or press <
).
AXI 02 AT • DSP Configurator Software
dialog box.
dialog box.
> on the
F6
13