View; Tools - Extron electronics AXI 02 AT User Manual

View

Meter Bridge — Opens a meter bridge to view
1
input and output activity. The meter bridge is a
floating window, allowing the user to work in the
DSP Configurator Software workspace while
simultaneously monitoring input and output activity.
NOTE: The meter bridge is only available in Live mode.
Re-enable All Dialogs — This option re-enables all dialog boxes that no longer appear
2
based on user selection (certain dialog boxes that appear are user-defeatable by
selecting a checkbox that reads

Tools

Presets — Contains a submenu to mark
1
and clear all elements in the main workspace
as well as an option to save marked
elements to a preset (see
next page).
Connect to/Disconnect from Device
2
— When in Emulate mode, this option
reads
the
Connect to Device...
(see Connecting Live to a Device
page 12). When in Live mode, this reads
Disconnect from Device
software to Emulate mode.
Device Manager — Opens the
3
( ) in the top right corner of the dialog box to view the
more information on using the Device Manager.
Issue RESET Command — Clears all gain settings, attenuation settings, and presets
4
for the AXI. This command does not reset general settings such as device name or
Dante network configuration.
Firmware Loader — Opens the Firmware Loader application if it is installed (see
5
the Firmware Loader Help file for help updating firmware). Visit
download Firmware Loader.
Device Settings — Opens the
6
and view the network configuration. Click the help icon (
dialog box to view the
Options — Opens the
7
appearance and default settings. Click the help icon (
dialog box to view the
Network Audio Control — Opens Dante Controller by Audinate for routing audio
8
over a Dante network (see
installed in order for the application to be opened. Visit
Dante Controller.
Do Not Show This Dialog Again
Presets
and opens
Connect to Device
dialog box
and returns the
Device Manager
Device Settings
Device Settings
dialog box to configure DSP Configurator Software
Options
topic for more information.
Options
Dante Controller
1
2
1
on the
2
3
4
5
6
on
7
8
dialog box. Click the help icon
Device Manager
dialog box to edit the device name
) in the top right corner of the
topic for more information.
) in the top right corner of the
on page 15). Dante Controller must be
www.extron.com
AXI 02 AT • DSP Configurator Software
).
topic for
www.extron.com
to
to download
10