Rear Panel Connections - Extron electronics AXI 02 AT User Manual

Rear Panel Connections

Figure 2.
A
Tip
Ring
Sleeve
Tip
Ring
Sleeve
Balanced Output
B
OUTPUTS
S/PDIF
1/2
1 2
A B
AXI 02 AT Rear Panel Connections
Analog Audio Outputs — Use a 6-pole or 3-pole, 3.5 mm captive screw connector to
connect two balanced or unbalanced mono line level devices. Balanced or unbalanced
stereo devices can also be connected using a 5-pole or 6-pole captive screw
connector.
Tip
NO Ground Here
Sleeve
Tip
NO Ground Here
Sleeve
Unbalanced Output
6-pole Audio OUTPUT Wiring
Figure 3. 6-pole and 3-pole Audio Output Wiring
ATTENTION:
• For unbalanced audio outputs, connect the sleeves to the ground contact.
DO NOT connect the sleeves to the negative (-) contacts.
• Pour l'audio asymétrique, connectez les manchons au contact au sol. NE PAS
connecter les manchons aux contacts négatifs (–).
NOTES:
• Balanced or unbalanced stereo sources can be connected with 6-pole
connectors.
• When using a 5-pole CSR adapter, connect it so the far left plug is inserted into
the far left jack of the 6-pole output.
S/PDIF Audio Output — Two S/PDIF output channels mirror the analog outputs on a
coaxial RCA connector. Attenuation applied to the analog outputs does not affect the
S/PDIF output.
Analog Audio Outputs
A
Tip
Ring
Sleeve
Balanced Output
3-pole Audio OUTPUT Wiring
AXI 02 AT • Installation and Operation
S/PDIF Output
B
Tip
NO Ground Here
Sleeve
Unbalanced Output
5