Installation and
Operation
This section describes the front and rear panel features and the rear panel connections. It
also provides procedures for installing the Dante Controller software. The following topics
are discussed:
•
•
•
•
System Configuration
Dante Controller for Windows from Audinate is required to select and route Dante transmit
and receive channels to all connected Dante-compatible devices (see
Installing Dante Controller for Windows
Rear Panel Features and Cabling
D D
A
B
Figure 3.
System Configuration
Rear Panel Features and Cabling
Front Panel Features
Resetting
A A
C C
B B
AT (PoE)
OUTPUTS
AXI 22 AT D
Rear
Power Input Connector
Line Output 1 connector
AXI 22 C AT Rear Panel
on page 16).
D D
Top
Line Output 2 Connector
C
AT (PoE) port connector
D
AXI 22 AT D • Installation and Operation
Downloading and
5