System View: return to User View with Ctrl+Z.
[Sysname] sysname R2000
[R2000]
system working mode
Syntax
system working mode { hybrid | hybrid-standard | spc | spe }
undo system working mode
View
System view
Default level
3: Manage level
Parameters
hybrid: Specifies the system to operate in hybrid mode. In this mode, both the SPE and SPC cards can
operate normally.
hybrid-standard: Specifies the system to operate in standard hybrid mode. This keyword is not supported
in the current software version.
spc: Specifies the system to operate in SPC mode. In this mode, only the SPC cards can operate normally.
spe: Specifies the system to operate in SPE mode. In this mode, only the SPE cards can work normally.
Description
Use system working mode to configure the operating mode of the system, thus changing assignment of
hardware resources.
Use undo system working mode to restore the default.
By default, the system operates in hybrid mode.
NOTE:
A reboot is required after you change the operating mode of the system to make your changes take effect.
Examples
# Configure the system to operate in SPC mode.
<Sysname> system-view
[Sysname] system working mode spc
Spc mode has been set. It will take effect after system restart.
system-failure
Syntax
system-failure { maintain | reboot }
undo system-failure
172