Slave Auto-Update Config - HP A8800 Series Fundamentals Command Reference

Next startup saved-configuration file: flash:/vrpcfg.cfg
Slot 1:
Current startup saved-configuration file: flash:/startup.cfg
Next startup saved-configuration file: flash:/vrpcfg.cfg
The output shows that the next-startup configuration file has changed from bb.cfg to vrpcfg .cfg on both
active MPU and standby MPU.
# Save the running configuration to the configuration file test.cfg on the standby MPU in slot 1.
Approach 1:
•
<Sysname> save test.cfg slot 1
The current configuration will be saved to slot1#flash:/test.cfg. Continue? [Y/N]:y
Now saving current configuration to the device.
Saving configuration slot1#flash:/test.cfg. Please wait...
........
Configuration is saved to slot1#flash successfully.
• Approach 2:
<Sysname> save slot1#flash:/test.cfg
# Save the running configuration to the next-startup configuration file without any confirmation required.
<Sysname> save force
Validating file. Please wait.....................
The current configuration is saved to the active main board successfully.
Slot 1:
The current configuration file is saved successfully.
Configuration is saved to device successfully.

slave auto-update config

Syntax
slave auto-update config
undo slave auto-update config
View
System view
Default level
2: System level
Parameters
None
Description
Use slave auto-update config to enable the configuration auto-update function for the standby MPU to
automatically save the running configuration as the active MPU does when you execute the save [ safely ]
[ force ] command or the save filename all command.
Use undo slave auto-update config to disable the function.
By default, the configuration auto-update function is enabled.
109