Connectors - Mitsubishi QX10 User Manual

7 CONNECTORS

7. CONNECTORS
Type
Soldering type connector
(straight out type)
Crimp-contact type connector
(straight out type)
Pressure-displacement type connector
(straight out type)
Soldering type connector
(both for straight out and 45-degree
types)
7
7 - 1
The 40-pin connectors and 37-pin D-sub connectors used with the input and output
modules are to be user-prepared.
The following tables list the connector types and applicable models, and introduce
crimp-contact and pressure-displacement tools.
(1) 40-pin connectors
(a) 40-pin connectors
Model name
*1
A6CON1
A6CON2
A6CON3
*1
A6CON4
*1: Use cables with outside diameter of 1.3mm or shorter to connect 40 cables
to the connector. In addition, consider the amount of current to be used and
select appropriate cables.
(b) 40-pin connector crimp-contact and pressure-displacement
tools
Type
Crimp-contact tool
Pressure-displacement tool
Applicable wire size
2
0.088 to 0.3mm
(28 to 22 AWG) (stranded wire)
2 2
0.088mm to 0.24mm
(28 to 24 AWG)
(stranded wire)
28 AWG (stranded wire)
30 AWG (single wire)
Flat cable 1.27mm pitch
2
0.088 to 0.3mm (28 to 22 AWG)
(stranded wire)
Model name
FCN-363T-T005/H
FCN-367T-T012/H
(locator plate)
FCN-707T-T001/H
(cable cutter)
FCN-707T-T101/H
(hand press)
MELSEC-Q
Applicable model
QX41, QX41-S1,
QX41-S2, QX42,
QX42-S1, QX71, QX72,
QX82, QY41H, QY41P,
QY42P, QY71, QY82P,
QH42P, QX41Y41P
Contact
FUJITSU COMPONENT
LIMITED
7 - 1