Mitsubishi QX10 User Manual page 130

10 PART NAMES
2)
3)
5)
No. Name
1) Module fixing hook
2) I/O indicator LED
3) Terminal block
4) Terminal cover
5) Module mounting lever
6) Module fixing screw hole
7) Metal fitting
8) Noise filter selector switch
*1
(Switch 1)
9) Function selector switch
*1
(Switch 2)
*1: Operate the switch with an industrial tool such as a driver, because the switch is placed beyond your reach.
Operate the switch carefully. Failure to do so may result in damage to the switch.
10 - 3
18-point screw terminal block type (high-speed input module)
1)
4)
7)
Hook used to fix the module to the base unit.
(Single-motion installation)
Used to indicate the I/O status (on/off). The corresponding LED turns on when the
I/O status is on.
A 18-point terminal block for connecting a power line and I/O signal lines
Terminal cover with recording paper
Used to mount the module into the base unit.
Used to fix the module to the base unit.
Do not touch as this may be deformed.
Used to set valid/invalid noise filters.
On: Valid (at the factory default) Off: Invalid
Used to switch the module function.
On: High-speed input module (at the factory default) Off: Interrupt module
6)
A
View A (enlarged view)
8)
Description
MELSEC-Q
9)
10 - 3