Door Switch; Loading Door Switch - Electrolux T4190 Service Manual

Loading door switch

A switch is placed opposite the door hinges at the door. The switch ensures that the
dryer will stop if the loading door is opened during operation.
If the dryer does not stop when the loading door is opened, the switch needs replacing.
Replacing door switch
1. Disconnect the power supply from the dryer.
2. Remove the top panel
3. Unplug the plug A and cut the cable ties, fig. 1.
4. Dismount the bracket with door switch B, fig. 1.
5. Dismount the defective switch from the bracket and replace it with the new switch
6. Remount bracket with switch.
7. Connect the plug.
8. Re-assemble the dryer
9. Test the new door switch - See Periodic Maintenance, Functional inspection.
1
A

Door switch

B
39