Gas Error - Electrolux T4190 Service Manual

Gas error (E 14)
Should a gas error occur error code E 14 will
be displayed, fig. 1.
In general gas errors occur due to supply
shortage either if there is a gas failure or the
gas pressure is too low.
Other errors which can cause E 14 :
• Ignition failure, check the distance between
the electrodes, fig. 2.
The distance must be 3 mm
• The sensor (the ionization must detect the
flame).
• The control box could be defective.
Replace the defective control box,
fig. 3 & 4.
Gas heating problems often occur due to
shortage in the air supply. It is therefore very
important that the air supply to the room is
sufficient.
A rule of thumb for dimensioning the room's air
inlet is that the air inlet opening must be 5 times
the size of the air outlet opening.
To read more about the evacuation system see
the installation manual for T4190.
3
Control box
Heating
(
± 0.5 mm).
4
1
ERROR
E14

GAS ERROR

PUSH GASRESET
BUTTON
2
6204
3 mm
55