Electrolux T4190 Service Manual page 53

Replacing the ignition electrode/flame sensor
Before starting follow the steps on the previous page,
chapter "Before replacement".
Ignition electrolde
1. Disconnect the ignition electrode which is
located on the left side of the heat box.
2. Unscrew the 2 screws and pull out the
ignition electrode and replace it, fig. 1.
Flame sensor
1. Disconnect the flame sensor which is
located on the right side of the heat box.
2. Unscrew the 2 screws and pull out the
flame sensor and replace it, fig. 2.
.
Heating
1
2
53