Electrolux T4190 Service Manual page 45

Replacement fan module:
From machine No: 4190/0106772
1
. Dismount the power to the dryer.
2. Disconnect motor plug A and the overheating thermostats B, disconnect the NTC
sensor C, fig. 1. Disconnect the pressure hose D from the fan inlet.
3. Unscrew these three screws on the right side and three screws on the left side of
the fan house, fig. 2.
4. Remove the fan house, fig. 3.
5. Remove the cover plugs and bushing. Unscrew and remove the fan inlet E.
1
A
3
Motor and transmission
D
B
C
2
4
45
E