Sensors and overheating thermostats
Outlet air - Overheating thermostat
Function
The outlet air overheating thermostat is located in the outlet air flow.
The overheating thermostat ensures that the dryer does not overheat during program
operation.
The thermostat opens automatically and has to be reset manually.
Resetting
Electric and gas heated dryer, fig. 1.
Fig. 1. The overheating thermostat is located behind the back plate of the dryer at the
bottom and on the right side of the dryer.
In order to reset the thermostat, remove the back plate and press the reset button A on
the thermostat.
Error code
The following error code is related to this section.
E08
See Service Manual for Compass Control for more information.
1
A
37