JLG 400SJ Operation And Safety Manual page 118

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3. Wheel Drive Hub
Lube Point(s) - Level/Fill Plug
Capacity - 17 oz. (0.5 L) - 1/2 Full
Lube - EPGL
Interval - Check level every 3 months or 150 hrs of oper-
ation; change every 2 years or 1200 hours of operation
4. Hydraulic Return Filter
Interval - Change after first 50 hrs. and every 6 months
or 300 hrs. thereafter or whenever Charge Filter is
replaced.
6-26
5. Hydraulic Charge Filter
Interval - Change after first 50 hrs. and every 6 months
or 300 hrs. thereafter or as indicated by Condition Indi-
cator.
6. Hydraulic Tank
Lube Point(s) - Fill Cap
Capacity - 40.0 gal. tank (151L) 52.0 gal. system
(196.8L)
Lube - HO
Interval - Check Level daily; Change every 2 years or
1200 hours of operation.
– JLG Lift – 3121216