Enabling Btoe For Online Users; Automatically Pairing The Btoe Pc/Laptop Application With The Phone; Figure 7-17: Ac Btoe Tcp Port - AudioCodes 450HD User Manual

3. From the AC BTOE TCP Port dialog that opens, configure the TCP Port:
The valid range is 1 to 65535.

To change the BToE TCP port on the phone side:
See the Administrator's Manual.


7.10.4 Enabling BToE for Online Users

Note: To enable BToE for online users, the Skype for Business server must be configured to
enable BToE.
7.10.5 Automatically Pairing the BToE PC/Laptop Application with the
Phone
Pairing is automatically performed when the phone's PC port is connected to the PC/laptop
'behind' the phone. See the Administrator's Manual for more information.
Note: Automatic pairing requires BToE PC/laptop application Version 2.x.
If the laptop after automatic pairing is disconnected and moved to another location, its
speaker/headset becomes the audio device associated with the Skype for Business client.
If the laptop is manually paired and then relocated, Skype for Business audio will remain through
the phone. It's therefore advisable to pair automatically.
Note: If the BToE PC/laptop application has already been manually paired with the phone, as
shown in the section below, and you want to automatically pair, you must delete the old pair
code from the BToE PC/laptop application in order to allow BToE automatic pairing:
User's Manual

Figure 7-17: AC BToE TCP Port

112
450HD IP Phone
Document #: LTRT-14820