Warning; International Electrical Symbols - AEMC AmpFlex 300A User Manual

®
AmpFlex - Flexible AC Current Probes
These safety wa rnings a re p rovided t o en sure the safety of
personnel and proper operation of the instrument.
 Read the in struction ma nual completely and foll ow all the
safety inform ation befo re attempting to use o r servi ce this
instrument.
 Wear protective clothing and gloves as required.
 Use ca ution on any circu it: potentially high voltag es an d
currents may be present and may pose a shock hazard.
 Read the safety spe cifications section prio r to using th e
current probe. Never exceed the max voltage ratings given.
 Safety is the responsi bility of the operator. T he A mpFlex
must be used only by qu alified p ersonnel u sing a pplicable
safety precautions.
 ALWAYS de-energize the c
AmpFlex
parts. Do not wrap on live conductors.
 ALWAYS c onnect the elec tronic module to the dis
device before wrap ping t he AmpFl ex
being tested.
 ALWAYS inspec t the module, sens or, s ensor cable, and
output termin als pri or to u se. Repl ace any defective parts
immediately. Use only factory parts.
 NEVER us e the AmpFlex
above 600V CAT IV; 1000V CAT III.

International Electrical Symbols

This symbol signifies that the current probe is p rotected by double
or reinforced insulation. Use o nly factory spe cified repla cement
parts when servicing the instrument.
This symbol signifies CAUTION! and requests that the user refer to
the user manual before using the instrument.
This symbol refers to a type B current sensor. Do not apply around
or remove from HAZARDOUS LIVE conductors without additional
protective means (de-energizing the circuit or wearing protective
clothing suitable for high voltage work).
Shop for AEMC products online at:

Warning

®
around b are conductors, b us ba rs, or near live
ShopAEMC
www.
ircuit before wrapping the
®
aro und th e sample
®
on ele ctrical conductors rated
- 2 -
.com
®
play
1.888.610.7664