®
AmpFlex
- Flexible AC Current Probes
Maintenance
Warning
For maintenance use only specified replacement parts.
To avoi d el ectrical shock, do not attempt to p erform a ny servicing
unless you are qualified to do so.
Do not perform any service while the AmpFlex
To avoid electrical shock and/or damage to the in strument, do not get
water or other foreign agents into the electronic module.
Also see warning on page 2.
Battery Replacement
If the powe r ON in dicator (g reen LE D) blinks o r does not lig ht up,
replace the battery.
Remove the AmpFlex
To replace the
reassemble. The gre en LED should go on whe n the module is t urned
on.
Cleaning
It is importan t to keep the probe sensor latch matin g su rfaces clean
and prevent foreign bo dies from hampering the cl osing. The se nsor
may be gently cleaned with
immediately after cleaning. Avoid water penetration i nto the elect ronic
module.
Make sure the sensor, electronic module, and all l eads are dry before
any further use.
Shop for AEMC products online at:
®
from any circuit before replacing the battery.
battery, open re ar case, replace b attery an d
a soft cloth, soa p and wate r. Dry
- 18 -
ShopAEMC
www.
®
is on any circuit.
.com
1.888.610.7664