Ericsson iPECS-100 Feature Description And Operation Manual page 336

iPECS-LIK
Feature Description & Operation Manual
Programming MSN Table Entries (PGM 202)
Called Telephone Number : Calling Number Digits. Mandatory.
CO Line Range : Utilization is Optional. Only the specified CO lines are employed
when make an outbound call using a MSN button if CO line range is specified. If CO
line range is not specified then it employs CO lines as same method as normal loop
button does.
Button Assignment
Using Station PGM button : [PGM]+{FLEX}+[PGM]+"85"+"#"'+MSN digits+[SAVE]
(CF. MSN DIGITS SHOULD EXIST IN ONE OF MSN TABLE ENTRIES)
Using Station Flexible Button Programming :
1. by Keyset
Dial "6"(MSN BUTTON) for Type option,
input MSN digits and [SAVE]
2. by WebAdmin
Type – LOOP
Value - MSN digits
Print option: as an account Code of Call Record
PGM177–PRINT MSN: ON/OFF:
Conditions
1. If the Called Party Number from the ISDN does not match an MSN Table entry, the
received digits are treated as defined for DID calls to determine an index to the
Flexible DID Table.
2. The MSN Table employs the CO Line entry as a quick look-up reference. If the CO
line number is programmed in the MSN Table, then only those entries with the CO
line number are searched, otherwise the entire MSN Table is searched for a match
to the Called Party Number.
3. When programs {MSN loop button} the "MSN digits" should be matched to one
entries of MSN pool. The button references an index of MSN entries.
4. MSN loop button is overwritten by a individual CO line button if it is exist. On the
other hand, MSN loop button is not overwritten by CO Group button.
Programming
STATION
CO/IP Lines
ISDN/ICLID
Related Features
 Direct Inward Dial (DID)
Hardware
 ISDN gateway Module
1 MSN Wait (PGM 114-Btn 12)
2 Flexible Button Assignment (PGM 115)
1 CO/IP Attributes III (PGM 143)
1 ISDN Attributes – I (PGM 200)
2 MSN Table (PGM 202)
299
Issue 6.1