Ericsson iPECS-100 Feature Description And Operation Manual page 287

iPECS-LIK
Feature Description & Operation Manual
Operation
Operation of this feature is automatic as configured.
Conditions
1. A station can reset only his own alarm, but it is an exception that Main ATD can
reset alarm of System ATD.
2. When Zone Notify Station for an alarm is not configured, then the system will notify
the unassigned alarm to System ATD.
3. Zone of the first CO line in DCOB Fault or SIP Registration Fault will be followed.
4. Zone Emergency Call Notify Station can make Emergency History button by
pressing PGM+0+8.
5. Each Zone Emergency Call Notify Station can see the emergency history of the
specified zone only, but System ATD can see all emergency history as before.
Programming
SYSTEM
ZONE DATA
Related Features

Emergency Call

Emergency Call Attendant Alert

SIP Service
Hardware
1 Emergency Call Notify (PGM 163-Btn 5)
2 DCOB Fault Notify (PGM163-Btn 6)
3 SIP Registration Fault Notify (PGM163-Btn 7)
1 Emergency Call Notify Station (PGM 439-Web only)
2 DCOB Fault Notify Station (PGM 439-Web only)
3 SIP Registration Fault Notify Station (PGM 439-Web only)
250
Issue 6.1