Ericsson iPECS-100 Feature Description And Operation Manual page 216

iPECS-LIK
Feature Description & Operation Manual
Conditions
1. Network Page code must be programmed in the Network Numbering Plan Table
(PGM 324) in the Caller System.
2. Network Page code and page destination must be programmed in the Network
Page Table (PGM 325) in the Called system.
3. Network Page destination could be Internal Page (MFIM100: 1-10,
MFIM300/MFIM600/MFIM1200: 1-35), External Page(1-2), All Call Page(Internal,
External, All).
4. User will hear an error tone if there is no idle networking path or if the page
destination is invalid.
5. User can make a page announcement without lifting the handset.
Programming
SYSTEM 1 Networking Basic Attribute (PGM 320)
2 Networking CO Line Attribute (PGM 322)
3 Network Numbering Plan Table (PGM 324)
4 Network Feature Code Table (PGM 325)
189
Issue 6.1