Alarm Notification Control - Ericsson iPECS-100 Feature Description And Operation Manual

iPECS-LIK
Feature Description & Operation Manual
Programming
Attribute Name
Use Master Wake Up
Use Master Call Forward
Use Master DND
Linked Pair Usage
Related Features

SMDR

Call Coverage

Wake Up

Message Wait / VM Message
Hardware

2.88 ALARM NOTIFICATION CONTROL

Description
The system can be configured to notify Emergency Call, DCOB Fault or SIP Registration
Fault to the assigned iPECS Phone. The following table shows the parameters for alarm
notification control.
Menu
Alarm Attributes
(PGM 163)
Zone Attribute
(PGM 439)
1 Personal Group Assignment (PGM 260)
2 Personal Group Attributes (PGM 261)
If this value is set to ON, all member wake-up follow by master wake up.
If this value is set to OFF, individual wake-up is worked by each station.
If this value is set to ON, call forward setting affect to Master and all
member.
If this value is set to OFF, individual Call Forward is worked by each
room.
If this value is set to ON, DND setting affect to Master and all member.
If this value is set to OFF, individual DND is worked by each room.
OFF (Incoming Call Only)
ON (All Call)
Attribute
Emergency Call Notify
DCOB Fault Notify
SIP Registration Fault Notify
Emergency Call Notify Station
DCOB Fault Notify Station
SIP Registration Fault Notify Station
Description
Range
ON/OFF
ON/OFF
ON/OFF
Station number
Station number
Station number
250
Issue 6.1
Default
ON
ON
ON
none
none
none