Ericsson iPECS-100 Feature Description And Operation Manual page 304

iPECS-LIK
Feature Description & Operation Manual
Operation
iPECS Phone
To leave a Message Wait, while receiving ring back tone or no response on a call announce
(H or P mode)
1. Press the [MSG/CALLBK] button, confirmation tone received.
2. Hang up, Message Wait activated.
To leave a Message Wait, while receiving DND tone
1. Press the [MSG/CALLBK] button, confirmation tone received.
2. Hang-up, Message Wait activated.
To leave a Call Back (queue for a station), while receiving busy
1. Press the [MSG/CALLBK] button, the user receives confirmation tone.
2. Hang up, return to idle.
To respond to a Call back recall, when the busy station is available the system calls back,
1. Lift the handset or press the [SPEAKER] button.
2. Previously busy station is called.
To retrieve Station Messages Waiting
1. Press [MSG/CALLBK] button.
Either the message contents summary will be shown as below or the Station
Messages Waiting will be listed, see step 3 below.
2. Dial "1" to select ST (Station Message Wait)
"1" => ST: Station Message Wait,
"2" => CL: CLI Message Wait
"3" => VS: VMIM/VSF Message Wait
"4" => VM: commercial Voice Mail
"5" => FS: Feature server
"6" => MS: SMS message wait.
3. Press the [VOL UP]/[VOL DOWN] button to scroll through the Station Messages.
To return a call for the current Station Message
1. Press the [SAVE] button.
To delete the first Message Wait from the list
1. Press "*" button, the list is updated removing the first station number in the list.
To delete all Message Waits
1. Press [SPEED] button.
2. Press "*" button twice.
ST CL VS VM FS MS
001 001 005 006 001 004
267
Issue 6.1