Ericsson iPECS-100 Feature Description And Operation Manual page 265

iPECS-LIK
Feature Description & Operation Manual
3. Dial the station range that was to be alerted. If a single station is to receive alarm,
enter "*" instead of a second station.
4. Press the [HOLD/SAVE] button.
Conditions
1. When register or erase wake-up time from a Digital station, it can use [VOL UP] and
[VOL DOWN] buttons to scroll between wake-up times.
2. When register wake-up time from a Digital station, it can use [#] button to scroll
between wake-up types.
3. When register wake-up time from Attendant Station, wake-up information will be
saved in a free wake-up entry, for each station from station range. If one station
has not any free wake-up entry, then the wake-up time from Attendant Station will
not be saved.
4. When erase wake-up time from Attendant Station, all wake-up information will be
erased.
5. When [PGM161 – New 5 Wake Up Usage] : changed from OFF → ON or from ON
→ OFF, all wake-up times for all stations are erased and current wake-up times
are canceled.
6. When wake-up time is active in current day, a *(star) will signalize near clock
displayed on Digital station LCD. If there is no wake-up time enabled in current day,
then there is no signalization on Digital station LCD.
7. After finalizing wake-up call (with answer or not answered), a new wake-up time will
be enabled, if it exist for current day.
8. Wake-up call functionality is similar with old wake-up feature.
9. Wake-up year can be from 2000 to 2031.
10. If wake-up type is YYMMDD, then when wake-up process is over(wake up ringing
and answer, or wake up ringing and Not answer), then wake-up setting value is
erased automatically.
Programming

PGM161 : ENABLE ENHANCED WAKEUP (ON/OFF)
Related Features
Hardware
230
Issue 6.1