Ericsson iPECS-100 Feature Description And Operation Manual page 269

iPECS-LIK
Feature Description & Operation Manual
are 0 and it means there is no limit to inter zone connections.
Operation
Operation of this feature is automatic based on zone maximum total inter zone connection
number and maximum inter zone connection number between zones.
Conditions
1. If zone maximum total inter zone connection number is set to 0, zone total inter
zone connection will not be limited.
2. If maximum inter zone connection number between zones is set to 0, inter zone
connection between such zones will not be limited.
3. If zone maximum total inter zone connection number is set to non-zero value and
current zone total inter zone connection number is more than maximum value, the
connection will be released, error tone will be played and the station related with
the connection will display "INTER CONN LIMIT OVER" on the LCD.
4. If maximum inter zone connection number between zones is set to non-zero value
and current inter zone connection number between zones is more than maximum
value, the connection will be released, error tone will be played and the station
related with the connection will display "INTER CONN LIMIT OVER" on the LCD.
5. As the connection limit is processed at the moment of the connection establishment,
if the limit is over while incoming ring is answered, the call will be released
immediately after answering and error procedure will be activated.
6. If the recording connection for call recording is over the limit, the call will be
recorded without content.
Programming
ZONE DATA
Related Features
Hardware
1 Zone Attributes (PGM 439-Web only)
2 Inter Zone Attributes (PGM 441-Web only)
234
Issue 6.1