Automatic Measurement Start - Kanomax 3887 Operation Manual

6-6 Automatic Measurement Start

Measurement will start automatically when the preset time has expired.
Setup procedure is shown below.
Power Up
<MENU>
1.MEASURE MODE
2.DATA PROCESSING
3.OPTIONS
< OPTION >
1. ALARM 4. HOTKEY
2. UNITS 5. AUTOST.
3. UTILITIES
<AUTOSTART>
DELAY 10 SEC
AUTOSTART:
Press PREV key
< OPTION >
1. ALARM 4. HOTKEY
2. UNITS 5. AUTOST.
3. UTILITIES
Press ENTER key
Press ENTER key
ON
Press the ENTER key to move the cursor to the
next item.
1>0>SEC>ON
Measurement mode changes
each time the ▲▼ key is pressed.
33