Alarm - Kanomax 3887 Operation Manual

6-1 Alarm

The procedure for setting the alarm is shown below.
Power Up
<MENU>
1.MEASURE MODE
2.DATA PROCESSING
3.OPTIONS
< OPTION >
1. ALARM 4. HOTKEY
2. UNITS 5. AUTOST.
3. UTILITIES
<ALARM>
1. 0.3um 1.00E+5
2. 0.5um 1.00E+4
3. 5.0um 1.00E+3
< OPTION >
1. ALARM 4. HOTKEY
2. UNITS 5. AUTOST.
3. UTILITIES
Press ENTER key
Press ENTER key
Press ENTER key
Alarm level can be set for each particle size as a
cleanliness criterion. When the set alarm level is
crossed, the reading will flash during a
measurement. Then, you will hear two beeps after
the measurement is complete.
The alarm level setting can only be made for
the "CNT" unit.
28