HID CP1000 User Manual page 81

Work Instruction Wizard
6. Memory Map Selection: Select card configuration and location where the data is written.
Click Next.
Field
Expected Card Type
Card Configuration
Note: Memory Map is grayed out with the Data Type set to HID Access Application, as the HID
Access Application is always encoded in the same place. However, if the Data Type is set to
Custom, the Memory Map is active.
Expected Card Type: Configured
Note: This is the default and recommended setting. All iCLASS cards shipped from the HID
factory are configured, unless specifically requested.
July 2017
Description
Configured or Unconfigured.
Note: If Unconfigured is selected, the Card Configuration field below must be
set.
Note: Unconfigured card are not supported on CP1000 encoders.
Select the memory configuration from the drop-down list. Options are:
2K (default), 16k2, 16k16, 16k2+16k1, 16k16+16k1, 2K (SO Only), 16k2 (SO Only),
16k16 (SO Only), 16k2+16k1 (SO Only), 16k16+16k1 (SO Only).
Page 6-5
PLT-01067, Version: A.7