Sync Encoder - HID CP1000 User Manual

Page 7-30

7.14 Sync Encoder

The following information describes how to synchronize the Database to the iCLASS SE CP1000
Desktop Encoder.
The need to synchronize the database to the encoder is required if you have connected a
new/different iCLASS SE encoder. The encoder configuration is stored on the encoder and only
copied on the database. This type of change would create a circumstance where the encoder and
the database on the PC are not in-sync.
The fact that the encoder and database are out-of-sync may not be apparent, as there is no
indicator that they are out-of-sync. Additionally the keys (custom and HID) from the first encoder
continues to display on the second encoder, as this information is coming from the database.
Note: The application allows the creation of a Work Order in this circumstance using the keys from
the first encoder. However, when you execute the Work Order you receive an error (authentication
or no key available). The following process synchronizes the database with the current encoder
attached to the PC.
1. Select Key Management > File tab.
2. Select the Sync Encoder option.
PLT-01067, Version: A.7
Key Management
July 2017