Multi-Technology Card Support - HID CP1000 User Manual

Page 6-58

6.6 Multi-Technology Card Support

To support multiple technology cards, a Work Order can contain multiple Work Instructions for
multiple encoding operations for a single technology. For instance, to read a multi-technology
Prox/iCLASS card you would first add a Prox Work Instruction and then add an iCLASS Work
Instruction. For more information on creating work instructions, see Work Instruction Wizard.
Note: A special feature exists to read the PACS credential from one technology (for instance Prox)
and write the same formatted credential into another technology supported by the card (for instance
iCLASS).
For example,
1. Open a Work Order then select Add Work Instruction.
2. Select the Prox technology type from the list and use the Work Instruction Wizard to create a
Prox Read instruction with the desired format. Save the Work Instruction.
3. Next, Select Add Work Instruction and use the Work Instruction Wizard to create another work
instruction.
4. Select the iCLASS technology type from the list and use the Work Instruction Wizard to create
an iCLASS Write - HID Access Application instruction.
Note: You must select the same format as in the Prox Read instruction in step 2 above.
5. On the Define Format Parameters page, select the Previous Work Instruction option for the
Parameter Type field. Do this for each parameter in the grid. This routes the PACS credential
data read from the Prox instruction into the iCLASS instruction.
6. Complete the Wizard selections and save the Work Order.
Note: These parameters are set to read-only in the Work Order Manager to prevent you from
manually entering data, which could be overwritten.
PLT-01067, Version: A.7
Work Instruction Wizard
July 2017