Add A User - HID CP1000 User Manual

Page 9-4

9.4 Add a User

The application is provided with an Admin level user configured. If a general operator level user, with
limited access is needed, use the following instructions.
1. Select User Config > Add User.
2. A blank New User record displays.
3. Enter the specific configuration for the new user.
Field
User ID
Name
Use Windows Authentication
Program Options
iCLASS SE
PLT-01067, Version: A.7
Description
Enter a User ID (wand over User ID for the field to appear).
Enter a user Name (wand over Name for the field to appear).
This option enables Windows Authentication. If selected the
User ID must match the type of encoder Authentication.
This option allows this user to have access to program options.
The iCLASS SE option allow you to select a Security Level (User
Role) for each user.
No Access - Does not allow access to the application.
Administrator - Sets the user access level at Administrator. There
is no restriction to this level.
Operator - Sets the user access level at Operator. This level
restricts configuration, but allows the user to execute Work
Orders and
User Config
July 2017