HID CP1000 User Manual page 49

Work Order Manager
Toolbar Function
Execute Selected
Execute All
Read Back
Card Info
July 2017
Description
Execute Work Order on selected record. This allows the user to select a record, and
encode the work instruction(s). As each card is completed, the display for the
credential record is grayed out and the serial number of the card displays in the
column. With each encoding, the associated Credential Credits decreases by one.
See Section 5.15.4: Execute Work Order on Selected Credential Records.
Note: If there are not enough encoding credits for the process a message displays.
You need to contact HID Global and order more encoding credits.
Execute on all records in Work Order. The system selects all records and encode. The
process continues until all the credential records have been encoded. See Section
5.15.5: Execute a Work Order on All Credential Records.
Reads back the card currently on the encoder and attempts to read a card and
locate its corresponding record in the data of the current Work Order. An error
message displays if the card information does not match that in the Work Order. See
Section 5.15.1: Add a Credential Record.See Section 5.15.6: Read Back
Reads the UID and memory configuration of the presented card.
Place a card on the iCLASS SE Encoder, select the card technology type, then select
this option.
Note: Not all cards display the same information. In general the information is:
CSN - Card Serial Number
Card Type (for example, SO Only)
Page 5-3
PLT-01067, Version: A.7