Iclass Se Encoder Options Tab - HID CP1000 User Manual

Page 2-18

2.12.4 iCLASS SE Encoder Options Tab

The Options tab contains basic configuration options, along with the option of checking the SAM
Firmware compatibility.
Field
Options
Custom Key
Access Code
PLT-01067, Version: A.7
Description
You can set several basic configuration options, select all that are needed:
• Load work order from last session at startup
• Automatically focus next row in grid after executing a work order
• Automatically add a new row after executing the last row in a work order
• Prompt user between each credential that is encoded during batch encoding
• Do not show firmware upgrade required dialog on startup
• Dynamically store and load keys and credential counters for encoders not present
when .ise or .xml configuration file is loaded.
You must enter the 4-9 digit code to securely access the Custom Keys from a workstation.
This code should be the same across all workstations where custom keys are
automatically synchronized.
Note: The SNMP encoder Admin keys must also match on all workstations where custom
keys are automatically synchronized.
Encoder Application Navigation
July 2017