Field
Low Credential
Credit Warning
Threshold
Actions
2.12.5 iCLASS SE Encoder About Tab
The About tab is displayed with the current application information.
July 2017
Encoder Application Navigation
Description
Sets the minimum threshold for consumed printing/encoding credits. A warning is issued
when the threshold is reached after an encoding operation is performed in the Work
Order Manager. The default minimum threshold is 25.
Check SAM Firmware Compatibility: Allows you to check and upgrade the SAM firmware
version.
When the desktop application is launched, it checks for the current SDK version of the
encoder device. If the SDK detected on the encoder is too old, the desktop application
boot loads the version of the SDK that is built into the assembly file to ensure
compatibility.
A message is displayed if the firmware is up to date.
Note: If the detected version is too new, you are directed to the HID support site to
download the latest version of the software. It cannot downgrade an encoder.
Load new Core Firmware to encoder: Allows you to upgrade the core firmware (.fw file)
on an iCLASS SE Encoder.
Page 2-19
PLT-01067, Version: A.7