Work Instruction Wizard
Method 2 (Configure ADF Manually)
Field
Data Type
Instruction Type
Options
ADF Configuration
Custom Writer
Operation
7. Go to Section 6.5.3: Seos: Custom Encoding (Standard Mode), steps 4 - 9.
July 2017
Description
For this example Custom must be selected.
For this example Write must be selected.
Not available with Custom.
ADF OID: A number (8 byte minimum) used to reference the application
after it is created.
Show OID using ASCII characters: Displays ASCII characters.
For this example Update Existing Data Object(s) must be selected.
Additionally select the Select ADF Configuration from an existing Work
Instruction option. Select the Work Instruction from the pull-down menu.
Note: This checkbox will only be present if there another Seos Custom Write
Work Instruction was created prior to this Work Instruction.
Page 6-43
PLT-01067, Version: A.7