HID CP1000 User Manual page 176

Page 8-10
8. Set the Output Format. Click Next.
Field
Output Format
Field
Card Data Length
Output Length
PLT-01067, Version: A.7
Description
Determines the format. The following options are supported on the encoder:
• Wiegand
If the Data Type is set to Binary Hex/Integer on previous page, the least
significant bits are sent. The maximum Output Length is 32.
When the input data is Raw Data, the maximum Output Length is 255.
• ABA Track II
If the Data Type is set to Binary Integer on previous page, Output Length
represents the number of BCD digits to send. Every digit is sent as a 5 bit
character (4 data bits and 1 parity bit) as defined in ABA Track II. Output
Length is max 10 digits.
When the input data is raw data then Output Length represents the number
of bits to send. No conversion is done. The bits are sent as is. Output
Length is max 255 bits.
• ASCII Dec
If the Data Type is set to Binary Integer on previous page, the least
significant digits are sent. Output Length represents the number of digits to
send. Every digit is send as a character. Output Length is max 10 characters.
When the input data is raw data the data is sent as is. Output Length
represents the number of characters to send. The maximum number of
characters is 32.
This field is auto-filled from the previous window.
This field is auto-filled from the previous window.
Sets the length of the data transmission.
Reader Configuration
July 2017