Table of Contents
Advertisement
6.5.7
Seos: Deleting a Custom ADF
Warning: This operation will delete any data associated with an ADF and the ADF itself and
should only be performed if the ADF and its data is no longer required.
1. Select the Seos technology type. Click OK.
2. The Work Instruction Wizard opens to allow you to configure the Work Instruction for Prox.
Click Next.
3. Configure Seos Instruction Mode: Make selections from the following. Click Next.
Field
Data Type
Instruction Type
Options
ADF Configuration
July 2017
Work Instruction Wizard
Description
For this example Custom must be selected.
For this example Delete must be selected.
Not available with Custom.
ADF OID: A number (8 byte minimum) used to reference the application
after it is created.
Show OID using ASCII characters: Displays ASCII characters.
Page 6-51
PLT-01067, Version: A.7
- Quick Links:
- Key Management
Hide quick links:
Advertisement
Table of Contents
