Iclass Se Encoder Plugins Tab - HID CP1000 User Manual

2.12.2 iCLASS SE Encoder Plugins Tab

Each plugin used by the iCLASS SE Encoder is digitally signed by a key managed by HID and known
by all encoders. Only Genuine HID plugins are recognized by the encoder. Initially, one plugin is
created for each supported card type (iCLASS, MIFARE Classic, MIFARE DESFire EVI, Prox and
Seos.
Plugins automatically install or refresh when Asure ID is started. Although additional plugins can be
installed, you can not delete the plugins installed by default. These plugins can only be Disabled or
Enabled.
Note: Disabling unused plugins may increase the overall performance of the Work Order Manager
and Reader Configurations within Asure ID.
The Plugins tab lists the plugins currently installed, the version number, the Applet version, and
whether the Applet is enabled or disabled.
Field
In addition to viewing the installed plugins, you can perform the following tasks:
July 2017
Encoder Application Navigation
Description
Install Plugin. Browses for a plugin from HID Global and installs the file.
Delete Applet.
Note: Clears all applet .dll files from the SAM.
These applets are uploaded automatically on an as-needed basis when required for an
encoding operation.
Page 2-15
PLT-01067, Version: A.7