Table of Contents
Advertisement
CamiFlex Base Unit – Head Unit
2 INSTALLATION
2.1 Rack mount - Base Unit
The equipment is designed to be installed in a standard 19" rack or any other support.
The equipment should be placed away from wet projections, with an operating temperature between
+5°C and +40°C.
The mounting of the equipment in the rack should be such that a hazardous situation may not be
completed due to an abnormal mechanical load. Account must be taken for the connection of the
equipment to the power supply and the effect of possible overload protection against overcurrent and
power cables. A study of the characteristics of the equipment must be made.
It is necessary to check the reliability of the grounding of the equipment especially for shunt
connection.
Special extended temperature range products can be produced on customer request.
All equipment connections are done from the rear panel.
The video cables shall not weigh too heavily on the connectors.
The earth connection (bolt with nut) must be connected to the earth of rack.
2.2 Head Unit overview
-8-
Advertisement
Table of Contents
