Table of Contents
Advertisement
CamiFlex Base Unit – Head Unit
2.4 Head Unit shooting position
When Head Unit is located under the camera,
the following items can be used
2.4.1 Fibre rocking system
The optical connector can be pull out of the Head Unit in order to release the connector and thus
guide the fibre down to about 45°.
- To use the system, you need to plug the fibre on Head Unit, then pull gently the connector toward
you to tilt it down.
- To replace the connector, just push it back in the Head Unit.
Rocking system
2.4.2 Tally
Tally display is present on top of the Head Unit allowing the cameraman to see whether the signal is
on air or not.
-10-
Advertisement
Table of Contents
