Table of Contents
Advertisement
ēKo Pro Series User's Manual
1. Determine the IP address of the router and the ēKo gateway.
2. Log into your router's we page (refer to your router's manual)
3. Enable and open the following ports on the router for the ēKo Gateway
Port 9003 for XCommands
Port 9005 for xml stream
Port 9080 for HTTP
Port 9843 for Flash player security
4. Save these settings and reboot the router
5. The remote internet access to ēKoView will be available through the following URL
http://<Router IP address>:9080
EXAMPLE
If you are using Linksys home router, follow these steps.
Log into the router's webpage
Open a web browser and type the IP address of your router in the address bar. (By default, the IP
address should be set to 192.168.1.1). Consult your router's user manual for details.
Determining the IP of the router
For Linksys routers access the Status page to see the IP address (71.131.195.240 in the example
below).
Enable and open the ports
For Linksys routers, access the "Applications & Gaming" page and click on
link.
90
Page
Router's IP address
Port Range Forward
Doc. # 7430-0710-01 Rev. C
Advertisement
Table of Contents
