Table of Contents
Advertisement
ēKo Pro Series User's Manual
6.2.6 Current Readings Page
This page shows sensor data from any given node in the form of dashboard and tabular data. You
Current Readings
can access this page by clicking on the
link in the Home tab. You can select the
node to view by selecting the node name from the Node List on the left hand side panel.
In the dashboard view at the top, all the sensors associated with the selected node are displayed
in the form of bar chart. The maximum and minimum sensor limits are displayed at the top and
bottom of the bar respectively and the current sensor reading is shown relative to these by a grey
line and a digital display. Similarly, the alert threshold (if configured) is shown in the red text. If
there is an active alert associated with any sensor, the bar graph would turn red and display the
alert threshold.
In the tabular view at the bottom, all the sensors associated with the selected node are displayed
in the form of a table. From here, you also have a quick links to Chart data from a specific sensor
during last hour, last day or last month.
NOTE:
When you are in any tabular view, left-clicking the column header allows you to
sort data by that field.
41
Doc. # 7430-0710-01 Rev. C
Page
Advertisement
Table of Contents
