Table of Contents
Advertisement
ēKo Pro Series User's Manual
Map Upload
Node List
Magnification
6.2.2 Uploading a background map
ēKoView allows users to upload a jpeg map file of the deployment area. This will show up in
ēKoView's Map page and is useful to locate where the sensor nodes have been placed. Refer to
the previous section 5.4.1 for more details on this.
6.2.3 Positioning the nodes
As new nodes are detected in the network they will appear in the Un-positioned Nodes box on
the left hand side Map Panel. To position a node onto the Map, click and drag the node from the
un-positioned box to its location on the Map. Refer to the previous section 5.4.2 for more details
on this.
NOTE:
You will need admin privileges to upload map or move the position of the nodes. If
you are not logged in as "admin",
Save
Upload
and
buttons will be disabled for you.
6.2.4 Node list
The node list in the left hand side Map Panel provide a quick snapshot of all the nodes
commissioned into the network. It provide a list display of Node name, last heard time and latest
readings and alerts. To view current readings, move the mouse cursor and hold it over icon.
To view current alerts, move the mouse cursor and hold it over
icon. If you want to locate a
specific node on the map, just click on the node name from the list and the corresponding node
will flash on the map.
36
Page
Doc. # 7430-0710-01 Rev. C
Advertisement
Table of Contents
