ēKo Pro Series User's Manual
1.
Range Section
– Select the calculation type from the left hand side.
Type
–Type in a user defined name for the calculation.
Name
– Specify a
Time Range
dormancy. Also, specify the End Time which is usually when dormancy ends.
2.
Sensors Section
Nodes
Sensors
and
bring up a Measurement and Sensor chooser dialog window. Select the sensor
measurement that you want to use for the calculations. The same calculation name and
conditions can be applied to several sensors in the network.
Doc. # 7430-0710-01 Rev. C
Start Time
for the calculation. Typically start time is before
– clicking on
button next to "Sensor" or "Measurements" will
Select
63
Page