Table of Contents
Advertisement
ēKo Pro Series User's Manual
systems the command is typically of the form "ssh username@hostname". The default ssh port is
22. Typically, it is not necessary to be familiar with the underlying Linux operating system to use
the ēKo gateway as it comes pre-programmed for its intended use as a Sensor Network gateway.
The ēKo gateway is running a recent Debian Linux kernel. Users familiar with Debian can utilize
all its features on the ēKo gateway as it conforms to the regular Debian setup. Note that the ēKo
gateway is running on an ARM architecture CPU in "little-endian" mode.
For users who are unfamiliar with Linux, here are a few useful commands to get started:
cd [dir]
df
du –s [dir]
dmesg
dselect
ls
lsusb
passwd
ps aux
rm file
rmdir dir
top
vmstat
w
7.2.2 Access using Samba
ēKo gateway uses Samba (Windows File Sharing) to enable transfer of files between ēKo
gateway and a PC. You can use Samba to map ēKo gateway directories to your PC (or you can
use ssh and scp if you have Linux) and transfer ēKoView configuration files.
NOTE:
For security reasons File Sharing is disabled by default. Refer to section 7.3.5
'
on how to enable it via the Gateway Administration page. It is highly recommended to place
the ēKo gateway behind an Internet firewall. Never enable File Sharing if the gateway is directly
connected to the Internet.
To use Samba:
1. Start Window's Explorer and select the "Map Drive" icon which brings up the screen
below.
2. Type in
\\eko-xxxxx\xbow
Finish
on
.
75
Page
- switch to the directory dir
- list the active file systems and their capacities
- list the total size of all files in the directory dir
- display the most recent boot log
- select packages to install into system (requires root access)
- list the content of the current directory
- list all attached USB devices
- change login password
- list all active processes
- delete a file
- remove an empty directory
- live update on running processes, use "q" to quit
- list current memory usage
- list who is logged in
(use your ēKo gateway's number in place of xxxxx) and click
Doc. # 7430-0710-01 Rev. C
Advertisement
Table of Contents
