Aceinna eko Pro Series User Manual page 20

Wireless sensor network system
Table of Contents

Advertisement

ēKo Pro Series User's Manual
NOTE:
If you are unsure whether Flash 9.x is already installed on your PC, continue
with the login steps. If Flash 9.x is not installed, your web browser will prompt you to install
Flash 9.x and will guide you through the steps to do so.
3.4.2 Opening ēKoView URL
ēKoView is a web-based application and can be accessed through a PC's web browser. To
access the application, users will need the ēKoView URL address.
1. Open a web browser (eg. Internet Explorer or Firefox)
2. The following URLs will bring up the ēKoView welcome page:
http://eko-xxxxx
where xxxxx is the serial number written on a sticker attached to the bottom side of the
gateway)
IMPORTANT:
users will need to use the IP address of the ēKo gateway device instead of the hostname. The IP
address of the ēKo gateway can be found either using the GatewayFinder tool (see section 7.1)
3. ēKoView requires a username and password to login. Type the default values below and
Sign In!
click on
Username: admin
Doc. # 7430-0710-01 Rev. C
If the name on the sticker does not bring up the ēKoView welcome page,
.
14
Page

Advertisement

Table of Contents
loading

Related Products for Aceinna eko Pro Series

This manual is also suitable for:

Eg2100En2100Eb2110

Table of Contents