Table of Contents
Advertisement
ēKo Pro Series User's Manual
10. Turn off the ēKo nodes by pressing the OFF button. The power off status will be
indicated by the red LED flash.
11. If a serial number from the drop-down list doesn't match with any of your nodes, you
may remove it from your network by clicking on the "
12. If you accidentally rejected a genuine node from your network and you want to recover it,
you may do so by clicking on the "
page. In the Advanced Commissioning dialog window, you can now select and highlight
the node that you wish to recover and click on "
13. ēKoView allows users to change the name/description of the commissioned nodes. This
will allow you to easily identify the nodes when deployed in the field. This can be done
later after the node deployment (refer to section 6.4.1).
14. If you go to the Home tab and click on the "Unpositioned Nodes" link on the left side
Map panel, you should see the ēKo node icon with the ID of your nodes. The ID should
correspond to the one that was noted down on the sticker of the ēKo node.
Doc. # 7430-0710-01 Rev. C
Reject
" button at the bottom right side of the
View Rejected
" button.
Accept
" button.
Page
18
Advertisement
Table of Contents
