Table of Contents
Advertisement
ēKo Pro Series User's Manual
: After selecting a Measurement type, ēKoView removes all ēKo nodes from the
4.
Sensors
sensor list that do not contain a sensor with the selected measurement type. Users can
now select the displayed ēKo nodes they want to plot on the right.
The chart wizard has several icons to simplify the selection of the sensors associated with
different nodes.
If an ēKo node contains several sensors that have the same measurement type users may
only wish to chart one of the sensors, using the
attached sensors. Then you can uncheck the sensors that you don't want to plot.
5.
Plot Type
: Trend chart traces can be plotted in the following modes
Line graph : connects data points by lines
Point graph : single data points
High-low graph: display the maximum and minimum of data for aggregated data (i.e.
daily, weekly, monthly, yearly).
Bucket Graph: display the cumulative or average data in the form of bars (Daily,
Weekly, Monthly)
45
Page
Chart Wizard Icon
Sensor Chooser Icons
Description
Expand All icon
Collapse All icon
Select All icon
Unselect All icon
button. ēKoView will show all
Expand All
Doc. # 7430-0710-01 Rev. C
Advertisement
Table of Contents
