Table of Contents
Advertisement
ēKo Pro Series User's Manual
Troubleshooting using Network Tab:
If the packet yield of a node is poor or intermittent check the Mesh Health page. This view will
show the RF connectivity of a unit to its neighbors. The neighbor table displays all neighbors
that the unit can communicate with and the Link Quality is a measure of how good the node can
receive messages from the neighbor and how well the neighbor can receive messages from the
node (bi-directional quality). A link quality of 1.0 indicates that 100% of messages are received.
Link Quality 0.95, 0.50 means that the node receives 95% of the messages from the neighbor and
the neighbor receives 50% of the nodes messages.
ACEINNA's mesh networking software using automatic message retries if a neighbor unit does
not receive a message. After trying multiple times it will switch to another neighbor. Even if only
50% of the messages are received by a neighbor this retry capability may still deliver 100% of all
messages forwarded.
6.5.3 Server Health Page
The Server Health page displays information about the XServe server running on the ēKo
gateway. The following fields are displayed:
Version: This current firmware version of XServe.
Uptime: The length of the time the server has been up and running.
Average Processing Time: The average time the server spends processing events in
seconds.
Doc. # 7430-0710-01 Rev. C
69
Page
Advertisement
Table of Contents
