Table of Contents
Advertisement
ULTRA CLEAR RESOLUTION CAMERA
Installation Instructions
1. Place the camera bracket at the installation position and fix it by using
mounting screws.
2. Connect the power/video cable then setup the camera menu if neccessory.
(Use the mini jig OSD control board)
3. Adjust the camera's viewing angle (Tilt, Rotation)
Mounting Screw
BH 3x10mm
OSD Controller
Connector
CAUTION
• Care should be taken the cable is NOT to be damaged, kinked or exposed in
the hazardous area.
• Do not expose the camera directly to a strong light source such as the sun or
spot light.
Bracket
TILT
[ REAR VIEW ]
08
ROTATION
Power/Video Cable
Video
Connector
Power
Connector
Advertisement
Table of Contents
